Barrier Vented Corner - PLR283

Drive-over barrier springs back into shape when heavy vehicles pass. Custom containment berm helps you control liquids in high-traffic areas.

• 14cm W x 28.5cm L x 5cm H
• Glued in Place with Reinforced Mounting Strips
• Vented Corner

Description

• The Drive-Over Barrier provides semi-permanent containment in high-traffic areas on concrete, asphalt or most sealed surfaces
• Constructed of 40-ounce, vinyl-coated fabric with an open-cell foam core; berm compresses to approximately 1/4" when driven over; springs back to shape when vehicles pass
• Durable enough to withstand indoor or outdoor traffic from trucks, loaded tow motors and other heavy vehicles with sufficient ground clearance
• Secure to floor with sealant and reinforce with predrilled aluminum mounting strips and steel anchors; seal seams with vinyl cement
• Create any configuration by combining with other Build-A-Berm components; ends overlap and can be sealed together for liquid-proof containment
• When used with standard Build-A-Berm Barriers, orange color indicates area where drivers can enter and exit
• Vent allows built-up air pressure caused by heavy vehicles driving over connected heavy-duty sections to escape without rupturing the seams of your barrier

Specifications

Additional Information

Product Data Sheet (PDS)
Chemical Compatibility Guide
Instructions

Hazardous And Other Wastes (Management and Transboundary Movement) Rules, 2016, Chapter 2, (6), (a)
The occupier shall take all the steps while managing hazardous and other wastes to contain contaminants and prevent accidents and limit their consequences on human beings and the environment;